Hydro-Stop, Inc. is a world leader in the manufacture of environmentally safe green roofing system and waterproofing systems.  Hydro-Stop is formulated to provide permanent solutions to water ingress problems throughout the entire building envelope.

Cool Roof

The Hydro-Stop PremiumCoat system has been tested and greatly exceeds the requirements of the Department of Energy for being a cool roof system.  Some advantages of a cool roof system are:

• Reduce cooling energy cost by 20% to 70%
• Reduce air pollution
• Extend equipment life
• Reduce the need for re-roofing

PremiumCoat System

PremiumCoat sustainable roofing and waterproofing system is one of the highest quality roofing and waterproofing systems available.  It is recognized by Factory Mutual as a Class 1 roofing system as both a stand alone roof system and as a recover system over a variety of substrates.

PremiumCoat is easy to apply, safe to work with and requires no special equipment.  The system includes a 10-year warranty in specific roofing applications which can be extended every 10 years under a proper maintenance schedule.  Uses:

• Metal roof waterproofing and cooling
• Parapet wall waterproofing
• Flat and low-pitched roof waterproofing
• Flashing of all types
• Concrete waterproofing
• Plywood waterproofing
• Deck waterproofing
• Exterior wall waterproofing

BarrierGuard System

BarrierGuard is designed for waterproofing all types of masonry surfaces such as foundation walls, concrete panels, exterior basement walls, retaining walls and moisture-retaining structures.  Uses:

• Waterproofing foundation walls
• Waterproofing basements
• Lining water-retaining structures
• Waterproofing masonry shrubbery boxes

FlexCoat System

FlexCoat is a “crackbridging” Elastomeric coating designed for waterproofing exterior walls.  Uses:

• Stucco wall waterproofing and crackbridging
• Concrete wall waterproofing and crackbridging
• Brick and masonry wall waterproofing and crackbridging
• Concrete block wall waterproofing and cracking

ClearGuard Plus System

ClearGuard Plus is a state of the art water repellent formulation which provides a durable subsurface, clear protective barrier against water, oil, water-based dirt and oil-based dirt.  Uses:

• Water and oil repellent for mortar, brick, stucco, split concrete
• Oil-based dirt and water-based dirt repellent on vertical and horizontal surfaces

StableRust Primer

StableRust Primer is a water based surfactant-free primer used in direct metal applications to stabilize and protect metal surfcaes.  Uses:

• Direct to metal applications
• Metal
• Anti-corrosion primer
• Great stain blocker on other types of surfaces

SureBond Primer

SureBond Primer is a water based pure acrylic primer used for sealing all types of masonry. metal and chalky surfaces for paintng and sealing.  Uses:

• Surface primer for all types of masonry
• Surface primer for old chalky paint for decks and walking areas

CleanAct Primer

CleanAct rinseable EPDM primer is a water based rinseable primer used directly on EPDM rubber roof applications to prepare the rubber substrate for acceptance of the PremiumCoat System.  Uses:

• Direct to EPDM rubber roofs

TrafficCoat

TrafficCoat is a specially formulated coating for use over the PremiumCoat Syatem.  It resists wear, yet remains flexible to absorb surface stresses and provides a positive aesthetic appearance.  Uses:

• PremiumCoat decks
• Walkways
• Tennis courts

Duro-Last is committed to being the industry leader when it comes to producing environmentally friendly roofing systems.  Duro-Last’s white “Cool Zone” PVC membrane is the best “green” choice for your facility in many ways!

Environmental Responsibility

Green, as in environment friendliness: closed loop manufacturing, membrane recyclability, and long-term performance.

Low Life-Cycle Costs

Green, as in the money you’ll save with the Cool Zone system - from reducing energy bills to preserving building components.

Garden Roof Membrane

Green, as in the best membrane to install under a garden roof system.

Click here to learn more about how Duro-Last is the best “green” choice for your facility!

SuperTherm®: The Most Effective Ceramic Insulation and Weatherization Coating on the Market

SuperTherm® is a ceramic based, water-borne, insulating coating, designed to block heat load, moisture penetration, and air infiltration over a surface and to reduce energy costs.  SuperTherm® is the most effective and longest lasting ceramic insulation coating on the market today. SuperTherm® reflects over 95% of the three radiation sources from the sun, which are ultraviolet, visual light and infra red rays.

Benefits of SuperTherm®:

• Energy Savings - SuperTherm® can provide energy savings of 20-70%.  According to use and application.
• R-19 Equivilant Rating - SuperTherm® reflects over 95% of radiation from the sun replacing the 6 to 8 inches of traditional insulation to block initial heat load.
• Blocks Moisture and Air Infiltration - SuperTherm® is certified and tested as a moisture and air barrier under ASTM certified testing.
• Environmentally Friendly - SuperTherm® is certified environmentally safe and eco-effective by MBDC LLC (Gold Certificate) and is approved by the USDA for use in and around food preparation areas.
• Class A Fire Rating - In case of fire, SuperTherm® will not contribute and will resist the spread of fire.
• Long Lasting - SuperTherm® has a 20+ year lifespan on roofing under normal conditions when applied as a system.

SuperTherm® is UL, FM, DNV, ABS, IMO, USDA, Energy Star, ICC, California Home Furnishings, and U.S. Coast Guard and CRRC approved to meet criteria.

SuperTherm® is Energy Star qualified as a 20 year roof coating.

Rust Grip®: Liquid Encapsulation Coating

Seal virtually any surface and protect it against corrosion, weather and physical wear with Rust Grip®. Rust Grip® is a three-coats-in-one system that acts as a primer, intermediate and topcoat with a single application.

Rust Grip® is a metallic-based, moisture-cure polyurethane encapsulating coating designed to coat and seal air, moisture, and minerals out of surfaces. Rust Grip® stands up to acids, salts and caustic materials with no loss of strength! For EPA VOC standards, Rust Grip® falls under the metallic pigmented coating category. Rust Grip® is a 414 grams/liter VOC.

Benefits of Rust Grip®:

• Fast Working - Rust Grip® begins its cure cycle within an hour, penetrating and swelling to seal surface pores.
• Versatile - Rust Grip® protects steel, aluminum, concrete, wood, fiberglass, and lead-based paints.  It is excellent for minimally prepared surfaces.
• Class A Fire Coating - In case if fire, Rust Grip® will help to prevent spread of, and will not contribute to the burn.
• Strong and Lasting - Rust Grip® has a 10+ year lifespan on substrates under normal conditions and strengthens surfaces to 6780 psi (473 bar).

Duro-Last ®, Inc. is unquestionably the pioneer and the nation’s largest manufacturer of custom pre-fabricated roofing systems.  The Duro-Last membrane is a co-polymer alloy (CPA), a polyvinylchloride blend.  The membrane is reinforced and contains a combination of UV stabilizers, UV absorbers, plasticizers, heat stabilizers, flame retardants, lubricants and biocides.  Duro-Last;s standard 40 mil. membrane out performs other roofing products in all critical areas.

Duro-Last Roofing can be installed on a new roof or any type existing roof, including metal.  Duro-Last provides the most comprehensive 15-year labor and material warranty in the roofing industry and is backed by a consequential insurance policy covering the building and the contents.  Duro-Last does not exclude ponding water on dead level roofs, as do most other manufacturers.

Congratulations to Duro-Last, now celebrating 30 years!

As a building owner and/or building maintenance manager, you know that operational costs have continued to escalate.  With dramatic budget cuts and buildings that are in need of repair or updating, you have to utilize every source you can to get the best value for your investment.

Saving money on energy costs and using “GREEN” products has become an increasingly important task in the facilities world, and the word “sustainability” is receiving a lot of attention.  Roof sustainability means the design, manufacture, maintenance, life-cycle impact, adaptive re-use, destruction and recycling of the roofing components that help meet the long term environmental standards demanded by today’s high-performance buildings.

What are the qualifications for a sustainable roof?

It is important to select a roof that delivers the Five E’s of high performance roofing:

ENERGY: Reduces energy use and improves a building’s efficiency in any climate.

ENVIRONMENT: Minimizes impact on the earth’s environment throughout the roof’s life and helps maintain healthy, productive environment inside the building.

ENDURANCE: Meets or exceeds performance requirements for long life: all-weather reliability; chemical, fire and puncture resistance; and ease of maintenance and repair.

ECONOMICS: Makes economic sense at the time of purchase and in the long run. A true economic comparison analyzes the cost of a roof throughout its life-cycle.

ENGINEERING: The right materials, design and manufacturing process enable the other four E’s, resulting in a complete, integrated roofing system that can be installed quickly and easily and performs reliably over the long run.

The Duro-Last Roofing System plays a crucial part in providing you with an economical, energy saving, high-performance and sustaianable roof.  Over the past 20 years Jaco Construction, Inc. has installed over 22 million square feet of the Duro-Last single-ply membrane; you can rest assured that Duro-Last and Jaco have successfully proven ourselves and helped keep these facilities safe and dry while lowering their energy costs.

Jaco Construction and Duro-Last can save you money on your energy costs! Call us today!